Download for App

Search for “Rafiki By Securex" app in App store/Google play, or scan the QR code below to download.

Register/Login with Existing Account

If you do not have an App account yet, you can register an account using your email . 

Click “Register”, enter Privacy Policy page on Rafiki by Securex App, click "Agree" to Agree and enter to the registration page for E-mail address. (The registration can only be done by email, cannot use mobile phone number).

Check your email for the verification and enter the code, set a password for your account. Finally set your exact GPS location where you will install the Rafiki Security Kit, and select rooms, Click on "Save" to complete registration.

STEPS FOR CONFIGURATION

Follow the link to access our detailed manual ---> Configuration user manual

Connect Wi-Fi for Alarm Panel

Attention before add device

The panel only support 2.4GHz Wi-Fi network. It does not support 5GHz Wi-Fi network. Before configure Wi-Fi, please set the router parameters.All home and office WI-FIs are within the required parameters. When configuring Wi-Fi, ensure your router, mobile and device are as close as possible for quick configuration of the device.

Connect Wi-Fi

Please connect the power adapter and turn on the switch of the alarm panel. There are two ways to make the panel connect with Wi-Fi.

Connecting to Wi-Fi Method 1:

After registering and logging in to the app, then or add device. Then select “Auto Scan ”, you will then be able to configure network step. 

 
Simultaneously, press the CDDE button on the panel and hold for approximately 3 seconds, the alarm panel will beep 6 times. When the alarm panel blinks (Learning Mode), then release【CDDE】key. The status indicator of panel will then flash quickly, you can then enter the network configuration state.


 After the panel connects to Wi-Fi successfully, you can then edit the device name and choose a scene that you prefer.

 

 Connecting to WiFi Method 2:

After registering and logging in to the app, then add a device. Then select “ADD Manually” and “More...” Then select “Security and Sensors”, next select “Alarm Wi-Fi” and click it. You can then configure the network.

 

 At the same time, press the CDDE button of the panel and hold around 3 seconds, the alarm panel will beep 6 times, then release【CDDE】key. The status indicator of panel will flash quickly, and the host enters the network configuration state.

 

After the panel has connected to Wi-Fi successfully, you can then edit the device name and choose a preferred scene.